E 250 V8-5.4L (2008)
Headlamp Bulb: Service and Repair
HEADLAMP BULB
Removal and Installation
WARNING: The bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle
the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may result in personal injury.
NOTE: The headlamp bulb should not be removed from the headlamp until just before a replacement bulb is installed. Removing the bulb for an
extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector.
Never turn on the headlamps with the bulb removed from the headlamp.
1. Remove the headlamp assembly.
2. Rotate the headlamp bulb counterclockwise approximately one-eighth turn and remove it.
3. To install, reverse the removal procedure.
