E 250 V8-5.4L (2008)
Transmission Position Switch/Sensor: Service and Repair
Torqshift - Automatic Transaxle/Transmission
Digital Transmission Range (TR) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the selector lever cable end and position it aside.
3. Remove the transmission fluid pan, gasket and filter.
4. Disconnect the transmission range (TR) sensor electrical connector.
5. NOTE: The pin should be driven up through the manual control lever.
Remove and discard the manual valve detent lever shaft retaining pin.