E 250 V8-5.4L SOHC VIN L (2004)
Drive/Propeller Shaft: Service and Repair
Driveshaft-Rear, Three-Piece
Driveshaft-Rear, Three-Piece
Removal
1. Raise and support the vehicle.
2. Index-mark the driveshaft at the axle flange.
3. Disconnect the driveshaft from the axle flange.
1
Remove and discard the bolts.
2
Remove and discard the U-joint retainers. Using mechanics wire, support the driveshaft.
4. Disconnect the driveshaft from the coupling shaft.
1
Remove and discard the bolts.
2
Remove the U-joint retainers.
-
Using mechanics wire, support the driveshaft.