E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
Intake Manifold: Service and Repair
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND CAN BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY. FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN
THE ENGINE IS NOT RUNNING.
1. Disconnect the battery ground cable.
2. Perform preservice procedures.
3. Remove the engine cover.
4. Drain the cooling system.
5. Compress and slide the hose clamp and disconnect the water outlet hose.
6. Remove the engine air cleaner (ACL) and air cleaner outlet tube.
7. Disconnect the throttle body control linkage by disconnecting the (A) accelerator cable, (B) speed control actuator cable and (C) throttle control
return spring.
8. Remove the bolts retaining the accelerator cable bracket to the throttle body. Remove the accelerator cable bracket.
