E 250 Van L6-300 4.9L (1984)
6.
Reinstall the pads. During pad installation, be careful not to dislodge the outer pad from its slide position. Refer to Figure 6. An incorrect
installation will cause a bent outer pad. Refer to Figure 2.
7.
Once the calipers have been reinstalled and servicing is complete, but before installing the wheels, apply the brakes and confirm the outer pad
position remains correct.
PART NUMBER
PART NAME
D7AZ-19A331-A
Silicone Caliper Grease And
Compound
OTHER APPLICABLE ARTICLES: 98-5A-13
SUPERSEDES: 97-15-17
WARRANTY STATUS: INFORMATION ONLY