Adjusting Wheel Bearings for E 250 Van L6-300 49L (1984)
![background image](/ford/e_250_van/l6-300_4.9l/Page-1375001.png)
Wheel Bearing: Adjustments
EXCEPT 4 WHEEL DRIVE MODELS
1.
Remove wheel and tire assembly, disc brake caliper and pads, dust cap, locknut, adjusting nut, washer and cotter pin.
2.
Tighten wheel adjusting nut to 22-25 ft. lbs. while rotating disc brake rotor in opposite direction.
3.
Back off wheel retention nut 1/8 turn and install retainer and cotter pin without any additional movement of nut.
4.
Reinstall dust cap, caliper, pads and tire and wheel assembly.