E 250 Van L6-300 4.9L VIN E 1-bbl (1982)
11.
Inspect the blower scroll cover seal for full contact impression with the edge of the blower housing. If full contact is not evident or the seal is
damaged, replace the seal or repair the skipped areas with RTV sealer.
12.
Reassemble the blower, blower scroll, electrical connections and check for proper blower operation as described in the applicable Shop Manual.
Be sure that the blower motor wire grommet is pulled into the hole in the housing.
PART NUMBER
PART NAME
CLASS
E5UZ-19858-B
Check Valve Assembly
A
Production Aspirator Drain
Tube Built March, 1984
thru September, 1984
D6UZ-19858-B
Check Valve Assembly
B
"Duck Bill" Drain Tube
Built Prior to March, 1984
E7UZ-19B898-A
Deflector
C
E7UZ-18K368-A
Venturi
C
382443-S
Rubber Cap
BS
D6AZ-19562-A
Silicone Sealer
A
OTHER APPLICABLE ARTICLES: 86-9-14, 85-11-16
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP19858A85
TIME:
1.2 Hrs. - Vehicles produced from 1975-84 (produced prior to March, 1984).
1.5 Hrs. - Vehicles produced from March, 1984.
OPERATION: SP18424A86 - To be performed only after one of the above operations has been completed.
TIME:
0.9 Hr. DLR. CODING: Basic Part No. 19858 - Code: 48
(Figures 22 through 35 on following pages)