E 250 Van V8-351 5.8L VIN H 4-bbl HP (1985)
Wiper Motor: Service and Repair
E-100---350
1.
Disconnect battery ground cable.
2.
Remove fuse panel and bracket assembly.
3.
Disconnect wiper motor electrical connectors from motor brush cap and gearbox cover.
4.
Remove both wiper arm and blade assemblies.
5.
Remove outer air inlet cowl, then the motor drive arm-to-linkage mounting arm and pivot shaft assembly retaining clip.
6.
Remove wiper motor attaching bolts and the wiper motor.
7.
Reverse procedure to install.
