E 250 Van V8-7.3L DSL (1988)
1. Separate drive train as shown in the Drivetrain Disassembly image.
Removing Reverse-High Clutch Pressure Plate Snap Ring
2. Remove pressure plate snap ring from clutch.
3. Remove clutch parts.
Removing Reverse-High Clutch Piston Snap Ring
4. Install tool shown in the Removing Reverse-High Clutch Piston Snap Ring image or its equivalent on clutch drum. Ensure legs clear snap ring
enough to permit expanding it for its removal. Remove tool after snap ring has been removed.
