E 350 V10-6.8L (2007)
![background image](/ford/e_350/v10-6.8l/Page-2255002.png)
3. Remove the shoulder safety belt guide.
4. On a rear safety belt retractor and tongue without a flip-up shoulder safety belt cover, remove the shoulder safety belt guide.
1. Position the shoulder safety belt cover aside.
2. Use the Safety Belt Torx(R) Bit to remove the bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
3
Remove the shoulder safety belt guide.
5. Remove the screws and the video display, if equipped.
-
Disconnect the electrical connectors.
6. Remove the upper rear body side trim panel.
1. Remove the 3 pushpins.
2. Remove the upper rear trim panel.