E 350 V10-6.8L (2007)
![background image](/ford/e_350/v10-6.8l/Page-528001.png)
Lifter / Lash Adjuster: Service and Repair
Hydraulic Lash Adjuster
Material
Removal
1. Remove the camshaft roller followers.
2. NOTE: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their
original locations.
Remove the hydraulic lash adjusters.
Installation
1. NOTE: Lubricate the hydraulic lash adjusters with clean engine oil prior to installation.
Install the hydraulic lash adjusters in their original locations.
2. Install the camshaft roller followers.