E 350 V10-6.8L (2007)
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure, even when the engine is not running. Do not work on any fuel system
component until fuel system pressure has been relieved. Failure to follow these instructions may result in personal injury.
1. Remove the engine cover.
2. Disconnect the fuel supply hose spring lock coupling. For additional information, refer to Fuel Delivery and Air Induction.
3. Disconnect the battery ground cable. For additional information, refer to Battery.
4. Drain the cooling system. For additional information, refer to Cooling System.
5. Remove the air cleaner and the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
6. Remove the generator. For additional information, refer to Alternator.
7. Compress and slide the hose clamp and disconnect the coolant hose.
8. NOTE: The red clip must be pulled out before disconnecting the electrical connector.
Disconnect the electronic throttle body (TB) electrical connector.