E 350 V10-6.8L (2007)
4. Remove the balance shaft.
5. CAUTION: Unless otherwise instructed, at no time when the timing chains are removed and the cylinder heads are installed may the
crankshaft or camshaft be rotated. Severe piston and valve damage will occur.
Position the crankshaft with the keyway at the 12 o'clock position.
6. Install and carefully tighten the special tool on the camshafts.
7. CAUTION: If one or both of the tensioner mounting bolts are loosened or removed, the tensioner-sealing bead must be inspected for seal
integrity. If cracks, tears, separation from the tensioner body or permanent compression of the seal bead is observed, install a new
tensioner.
Remove the 2 bolts, the LH timing chain tensioner and tensioner arm.