E 350 V10-6.8L (2007)
![background image](/ford/e_350/v10-6.8l/Page-2016002.png)
7. Remove junction box bracket bolts.
-
To install, tighten to 28 Nm (21 lb-ft).
8. Remove the junction box bracket bolt and position the junction box aside.
-
To install, tighten to 28 Nm (21 lb-ft).
9. Remove the engine cover.
10. NOTE: Charge air cooler (CAC) side shown, turbocharger side similar.
Loosen the CAC tube clamps.
-
To install, tighten to 12 Nm (9 lb-ft).
11. Remove the bolt and position the ground wire aside. Disconnect the electrical connector pin-type retainer.