E 350 V10-6.8L (2007)
6. CAUTION: Install the driveshaft with new bolts. If new bolts are not available, apply Threadlock to the threads of the original bolts.
CAUTION: The driveshaft flange fits tightly on the pinion flange pilot. To make sure that the driveshaft flange seats squarely on the
pinion flange, tighten the bolts evenly in a cross pattern as shown.
Position the driveshaft flange on the pinion flange with the index marks aligned and install the bolts.
^
Tighten to 112 Nm (83 ft. lbs.)
7. Check and as necessary, fill the axle with the specified type and amount of lubricant.
8. Lower the vehicle.