E 350 V10-6.8L (2007)
6. Using the special tool, remove the manual valve detent lever shaft retaining pin.
7. CAUTION: Be careful not to damage the manual control lever bore.
Remove the manual control lever shaft assembly.
8. Remove the transmission range sensor and detent lever assembly.
1
Remove the bolts.
2
Remove the transmission range sensor and detent lever assembly.
3
Disconnect the park rod from the detent lever assembly.
Installation
Early Build Vehicles With Externally Mounted Remote Filter
CAUTION: Early build vehicles, those equipped with an externally mounted remote filter, are also equipped with a different design sump
filter and bottom pan. Always pair the sump filter with the correct bottom pan design, to avoid cavitation, filter cracking and transmission
damage.