E 350 V10-6.8L VIN S (2006)
is closed.
Install the windshield glass.
10. Wipe off any excess urethane adhesive and apply a 6 mm (0.23 in) bead of Pumpable Foam Dam ESB-M4G309-A between the windshield header
seal and the urethane sealant.
11. Fill the cavities between both the LH and RH sides of the windshield header seal and the sheet metal, using RTV Sealer ESB-M4G92-A for a total
length of 50 mm (1.96 in) from the base of the A-pillars.
12. Install the inside rear view mirror.
13. Install the roof trim panel.
14. Install the LH and RH A-pillar mouldings.
15. Install the cowl grille panel.
16. Install the windshield wiper arms.