E 350 V8-4.6L SOHC VIN W (2005)
1. CAUTION: Always fill the cooling system with the same coolant that is present in the system. Do not mix coolant types.
Install a new O-ring on the coolant pump. Coat the new O-ring with engine coolant.
2. CAUTION: Do not rotate the coolant pump housing once the coolant pump has been positioned in the cylinder block. Damage to the O-ring seal
will occur.
Install the coolant pump.
1
Lubricate the new O-ring seal using engine coolant and install the O-ring seal onto the coolant pump.
2
Position the coolant pump into the engine block.
3
Install the bolts.
3. Position the pulley onto the coolant pump and install the bolts.
4. Install the accessory drive belt.
5. Install the fan and fan clutch.