E 350 V8-6.0L DSL Turbo (2007)
1. Remove the 2 screws.
2. Remove the pushpins.
3. Remove the lower rear body trim panel.
12. Remove the lower front body side trim panel.
1. Remove the 6 screws.
2. Lift the lower front trim panel slightly upward and remove the panel from the body side.
13. NOTE:
-
Replace any metal clips to the quarter trim panel before installing.
-
To install the upper front body side trim panel, start at the front lower corner, then work along the lower edge to the pillar.
-
To install the upper rear body side trim panel, start at the front lower portion and work up the pillars.
-
To install, reverse the removal procedure.
