E 350 V8-6.0L DSL Turbo (2007)
Brake Caliper: Service and Repair
Brake Caliper Anchor Plate, Rear
Brake Caliper Anchor Plate - E-150, E-250, E-350
Brake Caliper Anchor Plate - E-150, E-250, E-350
Removal and Installation
1. Remove the brake pads.
2. If equipped, remove the 2 stone shield nuts and the stone shield.
^
To install, tighten to 40 Nm (30 ft. lbs).
3. Remove the 2 brake caliper anchor plate stud bolts and the brake caliper anchor plate.
^
To install, tighten to 175 Nm (129 ft. lbs).
4. To install, reverse the removal procedure.