ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Removal and Replacement|Page 2230 > < Removal and Replacement
Page 2
background image

7. NOTE:  Air cleaner side shown, other side similar.

Loosen the clamps and remove the air cleaner outlet tube.

8. Loosen the clamps and remove the charge air cooler (CAC) pipe.

^

To install, tighten to 12 Nm (9 ft. lbs).

9. NOTE:  If there is any oil residue, clean both connecting ports and the inside surface of the CAC hose to prevent the hose from blowing off.

Loosen the clamps and remove the CAC hose.
^

To install, tighten to 12 Nm (9 ft. lbs).

10. Disconnect the radiator vent hose.
11. Disconnect and remove the upper radiator hose.

Removal and Replacement|Page 2230 > < Removal and Replacement