E 350 V8-6.0L DSL Turbo (2007)
18. NOTE: Do not just tilt the top of the A/C condenser forward. It is necessary to position the entire A/C condenser forward. This allows the bottom
of the condenser to clear the transmission cooler fittings on the radiator.
Remove the 2 bolts and position the A/C condenser forward.
^
To install, tighten to 9 Nm (80 inch lbs).
19. Disconnect the oil level indicator and tube.
20. NOTE: The cooling module (radiator, charge air cooler and fan shroud) is removed as an assembly. If it is necessary to separate the radiator from
the cooling module, refer to Disassembly and Assembly.
Remove the cooling module from the vehicle.
21. To install, reverse the removal procedure.
