E 350 V8-6.0L DSL Turbo (2007)
4. Remove the bolts and power steering fluid indicator. Remove the power steering reservoir mounting bracket. Install the power steering fluid
indicator and position aside.
5. Disconnect the coolant hoses from the air cleaner outlet pipe.
6. NOTE: Air cleaner side shown, other side similar.
Loosen the clamps and remove the air cleaner outlet pipe.
7. NOTE: If there is any oil residue, clean both connecting ports and the inside surface of the charge air cooler (CAC) pipe to prevent the pipe from
blowing off.
Loosen the clamps and remove the CAC pipe.
^
To install, tighten to 12 Nm (9 ft. lbs).