E 350 V8-6.0L DSL Turbo (2007)
20. With the rocker arms removed, remove the special tool bolt and the special tool plate to gain access to the valve bridges.
21. Remove and discard the valve bridges.
Installation
1. CAUTION: Install new O-ring seals on the crankcase-to-head tube. It requires several hours after installation for the O-ring seals to
relax back to their original size. If the tube assembly is installed before the O-rings seals have relaxed, damage to the O-ring seals can
occur.
Install new O-ring seals on the crankcase-to-head tube assemblies.
2. NOTE: Apply clean engine oil on the valve stems prior to installing the valve bridges.
Install the new valve bridges.