E 350 V8-6.0L DSL Turbo (2007)
14. Install the remaining bolts and tighten.
^
Remove the 3 guide bolts.
^
Loosely install the 3 remaining bolts.
^
Tighten the 9 bolts in the sequence shown to 13 Nm (10 ft. lbs).
15. Apply clean engine oil and install the crankcase-to-head tube.
^
Tighten to 82 Nm (60 ft. lbs).
16. If removed, cover the LH cylinder head with an appropriate covering.
17. Install the RH high-pressure oil rail-to-valve cover gasket.
18. CAUTION: To prevent engine damage, do not use air-powered tools when installing the valve cover.
Position the RH valve cover gasket. Install the RH valve cover, stud bolts and bolts.
^
Tighten to 9 Nm (80 inch lbs).
