E 350 V8-6.0L DSL Turbo (2007)
18. Loosen the 2 RH motor mount nuts.
^
To install, tighten to 90 Nm (66 ft. lbs).
19. Loosen the 4 LH motor mount-to-cylinder block bolts.
^
To install, tighten to 80 Nm (59 ft. lbs).
20. Remove the 2 LH motor mount nuts.
^
To install, tighten to 90 Nm (66 ft. lbs).
21. Remove the removable stud.
^
To install, tighten to 55 Nm (41 ft. lbs).
