E 350 V8-6.0L DSL Turbo (2007)
2. Install the gasket in the oil cooler assembly cover.
3. CAUTION: In the event of a catastrophic engine failure, always install a new oil cooler cover assembly (with oil cooler). Foreign material
cannot be removed from the oil cooler.
Install the oil cooler assembly and the bolts.
^
Tighten to 22 Nm (16 ft. lbs).
4. Install the gasket in the oil filter base.
5. NOTE: The old oil cooler cover bolts or new self-tapping bolts must be used to cut the threads in the new oil cooler cover.
Install the oil filter base and the bolts.
1
Tighten to 22 Nm (16 ft. lbs).
2
Tighten to 10 Nm (89 inch lbs).
