E 350 V8-6.0L DSL Turbo (2007)
Oil Pan: Service and Repair
Oil Pan - Upper
Oil Pan - Upper
Removal
1. Remove the lower oil pan.
2. Remove the bolts and the upper oil pan.
^
Remove and discard the press-in-place gasket. Clean and inspect the sealing surfaces.
Installation
1. NOTE: Install a new press-in-place gasket.
Install the upper oil pan and tighten the bolts in the sequence shown.
^
Tighten to 13 Nm (10 ft. lbs).
2. Install the lower oil pan.