E 350 V8-6.0L DSL Turbo (2007)
3. Apply a bead of sealant at the seam where the crankcase and the lower crankcase meet.
4. Install a new engine front cover gasket.
5. Install the engine front cover and bolts.
^
Tighten to 24 Nm (18 ft. lbs).
6. Install the oil pump.
7. NOTE: Install a new O-ring seal on the coolant pump pulley.
If removed, install the coolant pump and bolts.
^
Tighten to 23 Nm (17 ft. lbs).