E 350 V8-6.0L DSL Turbo (2007)
Evaporator Core: Service and Repair
Evaporator Core
EVAPORATOR CORE
Removal and Installation
NOTE:
-
Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of
system contamination from a failed A/C compressor or damage to the suction accumulator.
-
If an evaporator core leak is suspected, the evaporator core must be vacuum leak tested before it is removed from the vehicle.
All vehicles
1. Recover the refrigerant.
2. Disconnect the battery.
Vehicles with 4.6L, 5.4L or 6.8L engine
3. Remove the air cleaner assembly.
4. Remove the battery.
5. Remove the battery tray.
1
Remove the bolts.
2
Remove the battery tray.
-
To install, tighten to 28 Nm (21 lb-ft).
6. Remove the bolt and clamp and the oil filler tube.
-
To install, tighten to 10 Nm (89 lb-in).
Vehicles with 6.0L diesel engine
