ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3148 > < Initial Inspection and Diagnostic Overview|Page 3146
Page 35
background image

G2-G4

Normal Operation

The parking aid module communicates with the scan tool through the International Standards Organization (ISO) 9141 communications network.
Circuit 70 (LB/WH) provides the network connection to the parking aid module. The parking aid module shares the ISO network with the restraints
control module (RCM) and the anti-lock brake system (ABS) module (if equipped). Voltage for the parking aid module is provided by circuit 294
(WH/LB). Ground is provided by circuit 57 (BK).

Possible Causes

-

Fuse

-

Circuit 70 (LB/WH) open

-

Circuit 294 (WH/LB) open

-

Circuit 57 (BK) open

-

Parking aid module

Test H: No International Standards Organization (ISO) 9141 Network Communication, All Modules
Are Not Responding

Initial Inspection and Diagnostic Overview|Page 3148 > < Initial Inspection and Diagnostic Overview|Page 3146