E 350 V8-6.0L DSL Turbo (2007)
19. Remove the 2 bolts and position the secondary fuel filter assembly aside.
20. NOTE: The exhaust gas recirculation (EGR) valve assembly has an internal exhaust gas recirculation position (EGRP) sensor.
Disconnect the EGR valve assembly electrical connector.
21. CAUTION: Do not attempt to remove the EGR valve without the use of the EGR valve removal tool or damage to the EGR valve will
occur.
Remove the bolts and rotate the EGR valve counterclockwise.
22. Install the special tool and remove the EGR valve.
23. Remove and discard the O-ring seals and the EGR gaskets.
24. Using the appropriate brush, clean the EGR port. Vacuum the ash and foreign material from inside the intake manifold.
Installation
