E 350 V8-6.0L DSL Turbo (2007)
10. Tighten the clamp for the turbocharger outlet pipe.
-
Tighten to 12 Nm (9 lb-ft).
11. Install the engine cover.
12. Tighten the clamp for the CAC duct.
-
Tighten to 12 Nm (9 lb-ft).
13. Position the cowl wiring harness. Install the bolts and connect the pushpin retainer.
-
Tighten to 2 Nm (18 lb-in).
14. Position the MAP sensor and install the bolt. Position the ground wire and install the bolt.
1
Tighten the MAP sensor bolt to 5 Nm (44 lb-in).
2
Tighten the ground wire bolt to 8 Nm (71 lb-in).