E 350 V8-6.0L DSL Turbo (2007)
5. NOTE: Air cleaner side shown, engine side similar.
Loosen the clamps and remove the air cleaner outlet pipe.
6. NOTE: If there is any oil residue, clean both connecting ports and the inside surface of the charge air cooler pipe to prevent the pipe from
blowing off.
Loosen the clamps and remove the charge air cooler (CAC) pipe.
-
To install, tighten to 12 Nm (9 lb-ft).
7. Remove the secondary fuel filter and remove all fuel from the filter housing.
-
To install, tighten to 14 Nm (10 lb-ft).