E 350 V8-6.0L DSL Turbo (2007)
7. Remove the bolt and PCM.
8. CAUTION: Do not pull on the wiring to remove the glow plug connector or damage may occur.
NOTE:
-
The Glow Plug Connector Remover/Installer does not work on all connectors.
-
Only one glow plug connector shown.
-
Only the No. 2 glow plug is accessed from under the hood.
Using the special tool, remove the glow plug harness as needed.
9. NOTE: If coolant residue is found on the glow plug, a new glow plug sleeve may have to be installed.
Remove the glow plug.
No. 7 and 8 glow plugs
10. Remove the engine cover.
