E 350 V8-6.0L DSL Turbo (2007)
All seats
14. NOTE: Power seat track shown, manual track similar.
Loosen the 4 seat track-to-cushion frame bolts and separate the seat track and pedestal from the seat cushion frame to allow removal of the safety
belt buckle switch electrical connector.
-
To install, tighten to 25 Nm (18 lb-ft).
15. Separate the electrical connector and wire harness pin-type retainers from the seat.
16. Separate the wire harness pin-type retainer from the seat.
17. NOTE: Seat with inboard side shield shown, seat without inboard side shield similar.
Remove the safety belt buckle and pretensioner bolt.
