E 350 V8-6.0L DSL Turbo (2007)
4. Remove the steering column shaft-to-steering column coupler bolt and disconnect the lower steering column shaft from the coupler.
^
Compress the steering column shaft.
^
To install, tighten to 25 Nm (18 ft. lbs.)
5. Remove the steering column shaft dash panel seal and the steering column shaft.
Commercial chassis
6. Remove the steering column shaft-to-steering gear bolt.
^
To install, tighten to 49 Nm (36 ft. lbs.)
7. Remove the steering column shaft-to-steering column bolt, disconnect the steering column shaft from the steering column and then remove the
steering column shaft.
^
To install, tighten to 40 Nm (30 ft. lbs.)
All vehicles
8. To install, reverse the removal procedure.