E 350 V8-6.0L DSL Turbo (2007)
before removing the bearing caps. Matching the letters is important at the time of installation.
To ease removal of the differential assembly, loosen the bolts, then pry the differential case, bearing cups and outboard spacers outward until they
are loose in the differential housing.
3. Remove the bolts and the bearing caps.
4. CAUTION: Do not spread the differential housing more than specified.
Using the special tools, spread the differential housing to the specification. Remove special tool 100-D002 after spreading the housing.
5. CAUTION: It will be necessary to use large pry bars to remove the differential carrier from the differential housing. Do not damage the
differential ring rear when carrying out this step.
CAUTION: Mark or tag the differential bearing cups, indicating from which side they were removed.
Remove the differential assembly with the bearing cups.
6. CAUTION: Mark or tag the outboard spacers indicating from which side they were removed.
Remove the outboard spacers.
