E 350 V8-6.0L DSL Turbo (2007)
2. Assemble 2 bolts into the differential housing cover at the 8 o'clock and 2 o'clock positions. Using these 2 bolts as a guide, position the
differential housing cover on the differential housing.
3. Install the remaining bolts. Tighten the bolts alternately and evenly.
^
Tighten Grade 5 bolts to 47 Nm (35 ft. lbs.)
^
Tighten Grade 8 bolts to 61 Nm (45 ft. lbs.)
4. CAUTION: Allow one hour cure time before filling the axle with the correct amount of specified lubricant and operating the vehicle.
Fill the differential housing with the specified type and amount of lubricant.
5. Lower the vehicle.