E 350 V8-6.0L DSL Turbo (2007)
7. CAUTION: Install the driveshaft with new bolts. If new bolts are not available, apply sealer to the threads of the original bolts.
CAUTION: The driveshaft flange yoke fits tightly on the pinion flange pilot. To make sure that the yoke seats squarely on the flange,
tighten the bolts evenly in a cross pattern in the sequence shown.
Position the driveshaft flange yoke on the pinion flange with the index marks aligned and install the driveshaft-to-pinion flange bolts.
^
Tighten to 112 Nm (83 ft. lbs.)
