E 350 V8-6.0L DSL Turbo (2007)
Removal
WARNING: To prevent glass splinters from entering the eyes or cutting the hands, wear safety glasses and heavy gloves when cutting the
glass from the vehicle.
1. Remove the windshield wiper arms.
2. Remove the cowl grille panel.
3. Drill out the rivets and remove the windshield glass stops.
4. Remove the inside rear view mirror.
5. Remove the RH and LH A-pillar trim panels.
6. Lower the front portion of the headliner.
7. CAUTION: To prevent damage to the windshield header seal, turn the blade so that the flat side is against the pinch weld.
NOTE:
-
Lubricate the existing urethane adhesive with water to aid the special tool while cutting.
-
Removing the windshield glass requires more than one technician.
Using the special tool, cut the urethane adhesive from the windshield glass starting at the top center and working toward the bottom corners.
