E 350 1 Ton Van V10-6.8L VIN S (1997)
Wheel Cylinder: Service and Repair
Overhaul
NOTE: Removal is not necessary to disassemble, inspect, hone or overhaul the rear wheel cylinder.
Wheel Cylinder
DISASSEMBLY
Disassemble the rear wheel cylinder
a. Remove the rubber boots (1).
b. Remove the rear wheel cylinder pistons (2).
c. Remove the cups (3).
d. Remove the expander (4).
e. Remove the (A) wheel cylinder bleeder screw from the (B) rear wheel cylinder.
ASSEMBLY
Follow the disassembly procedure in reverse order, noting the following:
^
Coat all the rear wheel cylinder parts with Ford High Performance DOT 3 Brake Fluid C6AZ-19542-AA or -BA or equivalent DOT 3 fluid
meeting Ford specification ESA-M6C25-A.