E 350 1 Ton Van V10-6.8L VIN S (1997)
11. Install the outer crankshaft sprocket and timing chain with the long hub of the crankshaft sprocket facing inward.
CAUTION: The camshaft sprocket can jump time if the Camshaft Holding Tool is not secured.
NOTE: Be sure the chain link and crankshaft sprocket timing marks are aligned. The lower half of the timing chain must be positioned above the
dowel.
12. Position the timing chain on the camshaft sprocket. Make sure the two copper-colored links align with the camshaft sprocket timing mark.