E 350 1 Ton Van V10-6.8L VIN S (1997)
NOTE: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
5. Disconnect the compressor suction line.
a. Remove the screw.
b. Disconnect the compressor suction line.
Note: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
6. Disconnect the A/C cycling switch electrical connector.
7. Remove the suction accumulator/drier.
a. Remove the screws.
b. Remove the suction accumulator/drier.
DISASSEMBLY