E 350 1 Ton Van V10-6.8L VIN S (1997)
Headlamp Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the instrument panel finish panel.
3. Remove the three headlamp switch bolts.
4. Disconnect the electrical connector and remove the headlamp switch.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control
Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16km (10 miles) or more to relearn the strategy.