E 350 1 Ton Van V10-6.8L VIN S (1997)
5. Use Sector Shaft Seal Replacer to install the steering gear sector shaft housing oil seal.
^
Lubricate the steering gear sector shaft housing oil seal.
^
Use Multi-Purpose Grease DOAZ-19584-AA or equivalent meeting Ford specification ESB-M1C93-A.
NOTE: Place the steering gear sector shaft housing oil seal on Sector Shaft Seal Replacer so the raised lip is toward the tool.
6. Position the input shaft bearing in the valve housing and use (A) Input Shaft Bearing Seal Tool Set and a (B) press to seat the bearing.
7. Use (B) Input Shaft Bearing Seal Tool Set and a (C) press to seat the (A) input shaft seal.
8. Install the input shaft snap ring.