ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/T - E4OD New Case And Extension Housing|Page 5373 > < A/T - E4OD New Case And Extension Housing|Page 5371
Page 1
background image

Extension Housing: Service and Repair

REMOVAL 

WARNING:  On vehicles equipped with an auxiliary battery, both the negative and positive battery cables must be disconnected.  

1. Disconnect the battery.
2. Raise and support the vehicle.
3. Remove the driveshaft.
4. Remove the transmission-mounted parking brake assembly (if so equipped).

5. Remove the transmission insulator and retainer-to-crossmember retaining nuts.

6. Secure the (A) Highlift Transmission Jack with the (B) E40D Transmission Jack Adapter to the (C) transmission.

7. Raise the transmission jack until the (A) transmission insulator and retainer studs are separated from the (B) transmission support crossmember.

A/T - E4OD New Case And Extension Housing|Page 5373 > < A/T - E4OD New Case And Extension Housing|Page 5371