E 350 1 Ton Van V10-6.8L VIN S (1997)
Wiper Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. If so equipped, twist the tilt wheel handle and shank and remove.
NOTE: For clarity, the steering wheel is not shown in the illustration.
3. Remove the upper and lower steering column shrouds.
(1) Remove the three screws.
(2) Remove the lower steering column shroud.
(3) Remove the upper steering column shroud.
4. Remove the multi-function switch.
(1) Remove the screws,
(2) Disconnect the two electrical connectors.
(3) Remove the multi-function switch.