E 350 Van V8-351 5.8L VIN G 2-bbl (1985)
![background image](/ford/e_350_van/v8-351_5.8l_vin_g_2-bbl/Page-1235004.png)
Figure 9 - HOLE DRILLING INSTRUCTIONS - CAM ATTACHMENT TO LOWER FLANGE RADIUS ARM
3.
With template secure, make a punch mark at the center of the small hole inside the printed circle. Scribe the slot printed/cut-out on the template
and die-grind out the slot at the axle-attaching hole the same size as the slot in the template and de-burr the surface avoiding rounding the edges of
the slot. Refer to Figure 9.