Brake Pad Soft Pedal Feel Pull Irregular Wear Page 2542
5.
Reinstall the caliper. During reassembly, inspect the pads and clean the caliper slide surfaces of corrosion, contamination, or burrs. Polish with a
crocus cloth and lubricate with Silicone Brake Caliper Grease and Dielectric Compound (D7AZ-19A331-A). Refer to Figure 5.
NOTE:
ON 1988-91 F-250/350 TRUCKS THAT WERE INVOLVED IN RECALL 92S44, BE SURE TO REASSEMBLE USING ALL COMPONENTS
OF THE BRAKE CALIPER PISTON INSULATOR KIT UNLESS PHENOLIC PISTONS HAVE BEEN INSTALLED.